1. < Home
  2. |
  3. Marine & Industrial Division
MARINE-&-INDUSTRIAL-PRODUCTS-Logo-Dropshadow
  1. < Home
  2. |
  3. Marine & Industrial Division

Our CULPEPER MARINE & INDUSTRIAL DIVISION offers a wide array of CCA treated lumber, timbers, and pilings for EPA approved uses. In addition, we carry hardware and all the accessories necessary to complete any marine project.

Culpeper MARINE products should be used for building in the harshest of environments namely in and around water. For centuries wood has been used in the construction of boardwalks, piers, marinas, seawalls and docks. Culpeper CCA pressure treated wood products can handle the toughest marine conditions in both brackish and salt water applications.

While deck boards and railing systems along with any part of the structure above the water line must be built with Culpeper MCA treated wood, the substructure for building in both brackish or salt water requires hardy CCA marine treatments.

Our marine treatments are available in CCA retention levels of .60, .80, 1.0, 1.5 and 2.5.

Learn more about Culpeper Marine Division

Learn more about building a shoreline deck

CCA Dimensional Lumber

#2 #1 #1 Prime
2×4 (8' - 20') 2x4 (8' - 24') 2x4 (8' - 24')
2×6 (8' - 20') 2x6 (8' - 24') 2x6 (8' - 24')
2×8 (8' - 20') 2x8 (8' - 24')
2×10 (8' - 20') 2x10 (8' - 24')
2×12 (8' - 20') 2x12 (8' - 24')
#2
2×4 (8' - 20')
2×6 (8' - 20')
2×8 (8' - 20')
2×10 (8' - 20')
2×12 (8' - 20')
#1
2x4 (8' - 24')
2x6 (8' - 24')
2x8 (8' - 24')
2x10 (8' - 24')
2x12 (8' - 24')
#1 Prime
2x4 (8' - 24')
2x6 (8' - 24')

CCA Timbers

#2 #1
4×4 (8' - 30') 4x4 (8' - 30')
4×6 (8' - 30') 4x6 (8' - 30')
6x6 (8' - 30') 6x6 (8' - 30')
6x8 (8' - 30')
8x8 (8' - 30')
8x8 Rough (8' - 30')
#2
4×4 (8' - 30')
4×6 (8' - 30')
6x6 (8' - 30')
6x8 (8' - 30')
8x8 (8' - 30')
8x8 Rough (8' - 30')
#1
4x4 (8' - 30')
4x6 (8' - 30')
6x6 (8' - 30')

CCA Tongue & Groove

1. 2×10 S1S Square Edge (8’ – 20’)

2. 3×10 S1S Square Edge (8’ – 20’)

Note: as you can see CCA treated wood is a darker green color compared to lumber treated with MCA.

Click to see MCA.

2_10_marine-inset

2x10 T&G

3_10_marine-inset

3x10 T&G

CCA Piling

POLE: Defined by its particular structural installation. If the pole is set with the butt (large end) in the ground, such as a utility pole or barn pole, it is referred to as a pole.

PILING: Also defined by its structural installation, pilings are driven into the ground with the tip (small end) first.

CLASS B: A minimum diameter of 12” up to 3’ from the butt with an 8” tip

6" Butt: 12', 16'

8” Butt: 10’, 12’, 14’, 16’, 18', 20’, 25’

9” Butt: 10’, 12’, 14’, 16’, 20’, 25’, 30'

10” Butt: 12’, 14’, 16’, 20’, 25’, 30’, 35'

12” Butt: 20’ – 35’

8” Tops: 20’ – 40’

Class B: 20’ – 70’

Aaron Watson Photography 083

Everlast Vinyl Sheet Piling

Everlast vinyl sheet piling is quickly becoming the most popular product to use for construction of bulkheads and seawalls.

        • Cost Efficiency
        • Consistent Appearance
        • UV Resistance
        • Unaffected by Marine Borers
        • Easy Installation
        • Better Warranty

e293ab1190ee8dcf4db4f3cf5e8f5091

ThruFlow

ThruFlow is an interlocking polypropylene decking system designed and engineered for use on docks, walkways, around pools and spas.

12” x 36”

12” x 48”

12” x 60”

Available in:
Clay, Maple, and Sea Foam

long-walk-1

Eco-Pole & Eco-Timber

SHRINK TUBING ON A MASSIVE SCALE

To create Eco-Pole and Eco-Timber Culpeper utilizes Durosleeve - a dock piling sleeve made of PVC that works the same as shrink tubing for electrical components.

PROTECT YOUR PILES

The Durosleeve is a rugged PVC pile sleeve that is heat shrunk onto Culpeper marine pilings before they are installed. The sleeve is not a "wrap.” It is seamless, water tight and totally encapsulates the piling where it is most vulnerable to attack by marine organisms, UV damage and abrasive wear and tear.

Eco-Pole

Available in:
8" Butt
10" Butt
8" Tops: 16'-60'

Colors:
Clay, Gray

Eco-Timber

Available in:
3x8, 3x10,
3x12, 6x6,
6x8, 8x8,
8x10, 10x10

Colors:
Clay, Gray

Check out Eco-Poles in action

20180808_084437 edited

Custom sizes are available. Please contact us for more information.

The marine environment can be especially harsh on hardware and fasteners. Our Marine Division can help you select the right product for the job at hand. The most popular items are nails, spikes, tie rods, helicoils, hex bolts, timber bolts and washers.

hardware_zoom

Need more information

or interested in becoming a dealer?